passthrough offers midi routing between connected ports on norns. it is similar to midi thru on hardware devices although it comes with some extra functionality.
passthrough extends norns to act as a midi routing hub. each incoming data to a port can be assigned to either a specific port for output, or all ports. it allows the user to send midi while simultaneously running a norns script.
passthrough is built as a mod and also as a library that can be added to individual scripts. they are functionally the same, but the mod version runs at all times, during scripts or when no script is loaded. If the mod is installed and turned on in the mods menu, passthrough will be running.
send notes through norns from a usb midi controller to a midi-compatible synthesizer.
scale quantization of incoming midi note data from controllers
routing an external clock source through norns between devices
by leveraging callbacks at a script level, incoming midi events can be shared between norns scripts and external hardware
norns + midi devices
if your midi hardware does not offer midi via usb, a midi interface such as an iConnectivity mio helps to connect with 5-pin midi ports.
passthrough is available from the maiden catalogue or by running the following command in the maiden repl
passthrough assigns some midi routing settings for each connected midi device in the norns system menu found at SYSTEM > DEVICES > MIDI :
Activeturns on or off passthrough for this port
Targetmay be all connected devices, or individual ones. this is the destination of incoming midi data
Input channelselects which midi channel is listened to for incoming midi data
Output channelchanges outgoing midi data to a specific midi channel, or leaves unchanged
Clock outallows/prevents clock messages being output
Quantize midiwraps note data to scales (quantization is set per connected midi device, so different scales can be used if desired)
Rootsets the root note of the current scale
Scalesets the scale type (Major, Minor.. )
additionally, Midi panic is a toggle to stop all active notes if some notes are hanging.
there are two example scripts, showing how to interact with passthrough either as a mod or a library. they detail how to include it in scripts so that users can define callbacks on incoming midi data.
navigate to the mod menu at SYSTEM > MODS, scroll to PASSTHROUGH and turn encoder 3 until a + symbol appears. restart norns and passthrough is running. when norns is shutdown, the current state of passthrough is saved. When norns is next powered on, this state will be recalled.
navigate back to the mod menu and this time there will be a > symbol to the right of PASSTHROUGH. press key 3 and the screen should display the passthrough mod menu
mod menu controls
key 2 returns to SYSTEM > MODS
key 3 changes which midi device is being edited
enc 2 scrolls the menu to access parameters for the current midi device
enc 3 changes the value of the selected parameter
passthrough can be used with the example scripts or by attaching it to external scripts, by adding the following code at the head of the script file:
if util.file_exists(_path.code.."passthrough") then local passthrough = include 'passthrough/lib/passthrough' passthrough.init() end
the installation has been successful if PASSTHROUGH appears in the script's params menu.
user event handling
scripts can listen for midi events handled in passthrough and define their callbacks.
-- script-level callbacks for midi event -- id is the midi device id, data is your midi data function user_midi_event(id, data) local msg = midi.to_msg(data) -- to find the port number, there is a helper function provided -- port = passthrough.get_port_from_id(id) end passthrough.user_event = user_midi_event
raise any issues experienced with passthrough either in the thread on lines or by logging a new issue on the github repo.
wishing to contribute a new feature or change? github pull requests are welcome.
for older versions, check the releases in the repo. releases older than
v2.1.0 are legacy, and no longer supported for development