slice and save samples for monome norns

this is a utility library, similar to @Justmat’s sam with some performative features. it was built to help me learn softcut and also make it easier to cut up samples for scripts that utilize samples (cheatcodes, goldeneye, etc.)

Requirements

norns

key/encoder controls

access instructions for key/encoder controls within the script by pressing k1+e3

• All screens
  • e2: next/prev control
• Screen 1: select/play sample
  • k2: select sample to slice up
  • e3: incr/decr playhead
  • k3: start/stop playhead
• Screen 2: play mode
  • k2/k3: delete/add cutter
  • e3: change play mode
• Screen 3: adjust cut ends
  • k2/k3: delete/add cutter
  • k1 + e2: select cutter
  • k1 + e3: adjust cutter
  • k1 + e1: fine adjust cutter
  • e3: select cutter end
• Screen 4: move cutter
  • k2/k3: delete/add cutter
  • k1 + e2: select cutter
  • k1 + e3: adjust cutter
  • k1 + e1: fine adjust cutter
• Screen 5: adjust rate
  • k2/k3: delete/add cutter
  • k1 + e2: select rate
  • e3: adjust all cutter rates
  • k1 + e1: fine adjust rate
  • k1 + e3: adjust selected cutter rate
• Screen 6: adjust level
  • k2/k3: delete/add cutter
  • e3: adjust level
• Screen 7: autogenerate cutters
  • e3: set # of clips to autogenerate (up to 20)

recording clips

clips may be recorded from the PARAMETERS>EDIT menu. what gets recorded depends on the play mode setting:

• stop: record the entire sample
• full loop: record the entire sample
• all cuts: record all sample areas set by cutters
• sel cut: record the sample area set by the selected cutter

important note: if play mode is set to all cuts, all rate settings must either be positive or negative.

Installation from maiden

;install https://github.com/jaseknighter/clipper

GitHub link

todo

fix bugs and improve usability (e.g. when cutting up a sample into > 15 pieces)

credits

many thanks to @infinitedigits and @zebra for coding advice!